Replacement & Spare Parts
Ensure the longevity and optimal performance of your investment by opting for OEM components and seeking expert service advice. Our team is well-equipped to assist you, whether you need to stock up on recommended spare parts or require a crucial component for overnight delivery.
Talk to our Parts Specialists
OEM Direct: Maintain the integrity of your investment with 100% factory direct replacement parts.
Expert Support: Let our experts diagnose and refer the parts you need to get your machine running optimally.
Quick Turnaround: We know time is money. We will do everything we can to minimize downtime.
Consumable Parts to Complete Rebuilds: There is no request too small or too large that we are not equipped to handle.
To expedite your order, please have as much information available as possible including:
- Work Order Number (welded to the body of your machine)
- Drawing Numbers (in your manual)
- Part ID Numbers
- Description of the issue you are experiencing
Quick Quote - Parts
Essential Parts Program
When you purchase equipment from Billco, we are invested in your success. It is our job to make sure your machine performs optimally. The Billco Essentials Package supplies you with common replacement parts that are subject to routine wear and are recommended for general stocking. The larger the package, the bigger the savings. The Essentials Replacement Parts Package is offered only on the following machines: Z-Series 96″ & Foundation Series 96″ Washers.
FOUNDATION PACKAGE 1
2 Brushes
4 Rolls
8 Bearings
4 Spur Gears
1 Detergent
2 Bag Filters
1 Immersion Heater
SAVE 10%
FOUNDATION PACKAGE 2
2 Brushes
8 Rolls
8 Spur Gears
16 Bearings
1 Detergent
2 Bag Filters
1 Immersion Heater
SAVE 15%
Z PACKAGE 1
2 Brushes
4 Rolls
8 Bearings
4 Spur Gears
1 Detergent
2 Bag Filters
1 Immersion Heater
SAVE 10%
Z PACKAGE 2
2 Brushes
8 Rolls
16 Bearings
1 Detergent
2 Bag Filters
8 Spur Gears
1 Immersion Heater
SAVE 15%
DI Filtration Exchange Program
If you are using Billco’s DI Filtration System with your glass washer, the filters need to be recharged in order to work correctly. This process can be time-consuming and costly. Billco’s DI Filtration Exchange Program simplifies this process by providing options to easily replace or exchange your filter bag.
Program Benefits
- Reduced freight costs by replacing only what is needed – the filter bag.
- Larger capacity bag means more time between replacements.
- Small compact footprint.
Replacement Options
1. Replacement Bag
(ID: 372-00198)
Minimize downtime by keeping at least one fully charged backup filter bag in stock. This is a brand new replacement bag.
2. Direct Exchange
(ID: 372-00199)
Once your DI filter is exhausted, remove it from the container, place it in a bag and ship it to our regeneration facility with a coupon enclosed. Your filter will be exchanged with a fully charged filter and sent back.
3. Regeneration Value Kit
(ID: 372-00202)
For the best savings, you will get 7 replacement bags, 7 regeneration coupons and a plastic drum for storage and transportation.
Tips For Handling Your DI Filter Bags & Housing:
Bags should not be removed from their packaging until they are ready to use.
Bags need to remain as moist as possible. When removing an exhausted bag from the filter housing:
- Allow as much excess water to drain out without drying out the media.
- Place the exhausted bag into a black plastic bag or black plastic drum to prevent the formation of algae. Seal the bag well.
Clean the inside of the vessel with a bleach solution and drain. Rinse well to eliminate any residue from the cleaning solution.
Replace the particulate filter bag and clean out the smaller vessel.
Insert new filter and media bag.
Make sure everything is properly sealed.
You can extend the life of your polishing media by “flipping” the bag when it’s exhausted.
Common Glass Washing Replacement Parts
Billco offers a variety of glass washer parts and consumables to maximize uptime and minimize downtime. The list of parts below are just some of the parts we offer.
A specially formulated, process-compatible cleaning solution that delivers ultra clean results.
- Proven Formula— efficiently removes cutting fluid and packaging materials
- Engineered Formulation—designed specifically for glass washers
- Non-Foaming Solution—rinses easily from glass surface
- Coated Glass Compatible—soft or hard
Available in 1 gallon and 5 gallon containers – Free samples are available.
Important Recommendations for Detergent Use
- Always maintain the suggested solution temperature and pH for the type of glass and coatings being processed.
- Recirculating tanks should be cleaned out thoroughly before adding a new solution mixture.
- Use in heated tanks for maximum effectiveness.
Engineered and constructed specifically for glass washing to withstand the rigors of 24 | 7 operation.
Rolls
- Sizes— 60″ 72″ 84″ 96″ 108″ 132″
- Durable Rubber Compounds— resist oil, heat, abrasions and chemical
- Non-Marking Roll Covering— prevents unnecessary marks on glass
- Fully Sealed Roll Core— prevents corrosion from inside out
- Recovering Available
Brushes
- Sizes— 60″ 72″ 84″ 96″ 108″ 132″
- Precision Balancing— ensures a smooth operation
- Strategic Bristle Layout— provides optimum cleaning efficiency and extends the life of the brush
- Stainless Steel Construction— protects shafts from corrosion
- Coated Glass Compatible— soft or hard
Billco can provide liquid filter bags that remove particles from the water to ensure the glass will be cleansed when it leaves the washer.
- Removes Sediment— keeping the glass clean
- Easy to Install— save time and remain safe
- Variety of Filters— Billco can provide the filter you need
- Guaranteed Compatibility— works with a variety of washers
Billco offers a variety of industrial immersion heaters for glass washers. Our OEM heaters are simple to install and easy to use to keep your washer running. We offer the best rates and highest quality replacement parts.
- Easy to Install— save time to minimize downtime
- Energy Efficient— cost effective and eliminates waste
- Simple and Safe to Use— eliminates risk of injury
- 10 Different Models— a variety of models to fit your washer
- Low Maintenance— decrease downtime with minimal maintenance
- Long Lifespan—reliable over an extended period of time
Billco has the capability to offer any size bearing for your glass washer. To avoid shutdowns, it is essential to maintain your bearings. Billco can have them shipped to you with minor hassle since our parts are stored right here in our Pennsylvania facility.
- Sizes— 1 3/16″, 1 9/16″, 3/4″
- Dependable and Durable—able to withstand 24 |7 |36 operation
- High Quality— superior to our competition
- Long Life Span— reliable over an extended period of time
Low-E Detection Brushes are located along the length of the surface detector strip to ensure the non-coated surface of the glass is loaded correctly. Additional brushes can be added at anytime and is encouraged to avoid product damage.
- 72″ Conveyor Width= 6 Brushes
- 84″ Conveyor Width= 7 Brushes
- 96″ Conveyor Width= 8 Brushes
Brushes should be cleaned/replaced regularly to avoid product damage from brush contamination.
Common Glass Cutting Replacement Parts
We maintain complete records of every Billco machine. Billco can recommend and supply any glass cutter part or consumable you may need. Many of our parts are universal and can be used on our equipment or a third party’s machine.
Billco has a wide selection of precision cutting wheels that provide a solution for every glass-cutting requirement.
- Wheel Selection— 5/32″ and 7/32″
- Tight Manufacturing Tolerances— enable a consistently perfect score
- Uniquely Engineered— to provide maximum glass edge strength and resistance to fracture
- Multiple Surface Grinds Available— for various scoring requirements
We recommend purchasing cutting wheel axles in a quantity of 100 and cutting wheels in a quantity of 50.
Precision carbide axles are designed to ensure smooth, accurate rotation of the cutting wheel.
Specially formulated for cutting most types of architectural or decorative glass, to provide to optimum score for a flawless breakout.
- Process Compatible Formula:
- works with most cutting machine fluid dispensing systems
- is easily removed by glass washing machine
- does not contaminate the glass washing solution
- Coated Glass Compatible— soft or hard
- Provides Excellent Scoring and Breakout
Available in 7 gallon containers
Important Recommendations for Glass Cutting Fluid Use
- Cutting fluid should never be diluted with water or any other solution.
- Cutting fluid is best utilized where breakout occurs directly after the cutting process.
- Washing the glass with heated detergent solution is always recommended after scoring/breakout and before further processing.
Billco’s heavy duty, long-lasting felt can be used on any cutting table, regardless of the manufacturer and can give you up to 7 years of continuous use without having to replace it.
- Universal for Any Cutting Table— regardless the manufacturer
- Durable and Long Lasting— up to 7 years of continuous use
Our quality standard felt cloth is designed to eliminate damage and scratching on your glass cutter and to allow the glass to maneuver freely. This wear-resistant cloth can be customized for any industrial glass cutter.
- High-Quality
- Cost-Effective
- Wear-Resistant
- Universal for any Cutter